模块

CD-SD-GW 称重模块

全不锈钢结构;使用柱式CD-SD传感器;安装便捷、快速;适用于汽车衡等;数字补偿技术及接口(传感器设定独立的数字补偿接口,对每只参数进行调整);防旋转的传感器连接组件压头;监控传感器的性能,自我监测;数字化自动角差修正补偿技术;RS485通讯信号接口,可以精确传输重量信号,不易受干扰和由此产生称重误差;不锈钢双屏蔽电缆和快速插拔的接头,不需要任何工具,简化现场服务;系统使用电气组网取消了连接多只传感器的接线盒,消除故障机率提升整个称重系统可靠性,简化现场服务

产品特点和优势

Features 主要特点
Total stainless steel construction
CD-SD (column type load cell) installed
Easy to install
Suitable for truck scales, etc.
RS485 communication signal interface, can accurately transmit the weight signal, and it is not easy to be disturbed so that to cause the weighing error
Cable and connection: stainless steel double shielded cable and quick plug connector, no need any tools so that simplify the on-site service
Wireless junction box: the system uses the network to cancel the connection of multiple load cells of the junction box, eliminating the probability of failure to improve the reliability of the entire weighing system, simplifying the on-site service
Digital compensation technology and interface (the load cell sets the independent digital compensation interface for each parameter adjustment)
The connecting assembly indenter of load cell with anti rotation
Monitor the performance of the load cell, self-monitoring
The compensation technique of digital automatic angle correction
全不锈钢结构
使用柱式CD-SD传感器
安装便捷、快速
适用于汽车衡等
数字补偿技术及接口(传感器设定独立的数字补偿接口,对每只参数进行调整)
防旋转的传感器连接组件压头
监控传感器的性能,自我监测
数字化自动角差修正补偿技术
RS485通讯信号接口,可以精确传输重量信号,不易受干扰和由此产生称重误差
不锈钢双屏蔽电缆和快速插拔的接头,不需要任何工具,简化现场服务
系统使用电气组网取消了连接多只传感器的接线盒,消除故障机率提升整个称重系统可靠性,简化现场服务
 
Capacities 量程
  6t,10t,20t,30t,50t
 
Specification 技术参数   
Zero Balance
零点平衡
±1.5% of rated output
Class of accuracy
准确度等级
C3、C6
Data transmission
数据传输
双向2线制RS-485接口
Communicationprotocol
通讯协议
传力定义
Data refresh frequency
AD采样
80HZ/S
Rate of data signalling
波特率
57600BPS
Operating temperature range
工作温度范围
-10℃ - +40℃
Load cell number range
传感器编号范围
1-10
Safe Overload
安全载荷
150%
Insulation Resistance
绝缘电阻
≥2000Mohm(50V DC)
Rated Excitation
激励电压
9-12V
Protection grade
防护等级
IP68

 

相关行业

我为什么要加入传力会员?我拥有的众多特权!